Licensed, insured, and IICRC-certified mold remediation done right

Toxic Mold Removal in SAN PEDRO, California

Toxic Mold Removal in SAN PEDRO, California starts with a same-day inspection and ends with post-remediation testing that proves the spores are gone. If you have spotted black mold growth in a bathroom, attic, or crawl space, our IICRC-certified technicians handle black mold remediation SAN PEDRO homeowners trust. We contain the work zone, run HEPA filtration, and remove contaminated materials before anyone gets sick.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Mold Remediation Service near me for SAN PEDRO homes
Careful work. Honest options.
About this service

What Toxic Mold Removal in SAN PEDRO, California Really Involves

Toxic Mold Removal in SAN PEDRO, California is the full containment, removal, and verification process that eliminates toxic mold growth and the airborne mold spores it releases. It is not a bleach wipe-down. We set up negative air machines and containment plastic sheeting, run a moisture meter and thermal imaging camera to find hidden reservoirs, then remove contaminated drywall, insulation, and framing under HEPA filtration. Every job follows the ANSI/IICRC S520 Standard for Mold Remediation.

SAN PEDRO homes deal with marine-layer humidity, older harbor-adjacent building stock, and winter rain that finds its way into crawl spaces and attics. That combination feeds black mold growth fast. When you search for toxic mold removal near me SAN PEDRO, you need a crew that knows how coastal moisture behaves in Barton Hill and South Shores, not a general handyman with a spray bottle. We test first, remediate second, and verify with post-remediation mold testing.

  • ✓ Verified Spore Reduction
  • ✓ Containment That Holds
  • ✓ Odor Gone, Not Masked
  • ✓ Insurance-Ready Documentation
What's included

What Our Toxic Mold Removal Service Includes

Every toxic mold removal job includes inspection, containment, removal, cleaning, and clearance testing. Add-ons like reconstruction or duct cleaning are quoted separately after the initial scope is confirmed.

✓

Full Moisture & Visual Inspection

We use a moisture meter, thermal imaging camera, and borescope inspection camera to locate hidden growth behind walls, under floors, and inside ceiling cavities before we quote the job.

✓

Containment & HEPA Filtration

Containment plastic sheeting, zipper doors, negative air machines, and air scrubbers with HEPA filters keep spores from spreading to clean areas during removal.

✓

Contaminated Material Removal

Drywall, insulation, and other porous materials with active growth are bagged and sealed for disposal. Structural framing is HEPA vacuumed and treated with antimicrobial solution and mold encapsulant.

✓

Antimicrobial & Fogging Treatment

After physical removal, we apply Benefect or Fiberlock antimicrobial and use a fogger to treat cavities and hard-to-reach surfaces. This step reduces residual spores and eliminates musty odors.

✓

Post-Remediation Clearance Testing

Air samples are collected inside the containment and in adjacent rooms, then sent to an accredited lab. We do not remove containment until spore counts return to normal baseline levels.

How it works

Our 5-Step Toxic Mold Removal Process

01

Inspection & Testing

A certified mold inspector walks the property with a moisture meter, thermal imaging camera, and borescope inspection camera. We take air and surface samples and send them to an accredited lab. Results come back in 24 to 48 hours with species identification and spore counts.

02

Containment Build

We seal the work zone with 6-mil containment plastic sheeting and zipper doors, then install a negative air machine and air scrubber with HEPA filters. This keeps spores from spreading to unaffected rooms. Setup takes 1 to 2 hours on a typical residential job.

03

Removal & Cleaning

Contaminated drywall, insulation, and porous materials come out bagged and sealed. Structural framing gets HEPA vacuuming, then treatment with an antimicrobial solution and mold encapsulant. Hard surfaces are wiped, fogged, and dried with dehumidifiers and air movers.

04

Verification Testing

After remediation, we run clearance air samples inside the containment and in adjacent rooms. If spore counts are elevated, we re-clean at no additional charge. We do not remove containment until the lab confirms clearance.

05

Reconstruction Handoff

Once clearance passes, we remove containment and provide a written scope for drywall, insulation, and finish work. Most customers are back to normal use of the space within 3 to 5 days of the initial call.

Tools & methods

Tools and Methods We Use for Mold Remediation

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Moisture Meter

Pin and pinless meters measure moisture content in drywall, wood, and framing to locate hidden reservoirs before visible growth appears.

Thermal Imaging Camera

Infrared imaging reveals temperature differences caused by trapped moisture behind walls and ceilings, guiding where we open inspection holes.

Borescope Inspection Camera

A flexible camera lets us see inside wall cavities and ductwork without large demolition, confirming growth location and extent.

Air Scrubber with HEPA Filter

Continuously filters airborne spores and particulate during remediation. We run at least one scrubber per contained work zone.

Negative Air Machine

Creates negative pressure inside containment so spores cannot escape into clean rooms. Exhaust is HEPA filtered before leaving the work zone.

Fogger

Applies Benefect or Fiberlock antimicrobial as a fine mist to treat cavities, ductwork, and hard-to-reach surfaces after physical removal.

Dehumidifier and Air Mover

Dri-Eaz and Phoenix Restoration units dry structural materials after cleaning, preventing new growth from residual moisture.

Real results

Before and after.

Bathroom Vanity Mold Removal

Before

A slow supply line leak behind the vanity fed black mold growth for months. Visible staining covered about 12 square feet of drywall, and the cabinet base was swollen and soft. Air samples showed elevated spore counts in the adjacent bedroom.

After

We removed the vanity, cut out contaminated drywall and insulation, treated framing with RMR-86 and mold encapsulant, and ran HEPA scrubbers for 48 hours. Clearance testing returned spore counts to normal baseline. The customer reinstalled a new vanity two days later.

Crawl Space Mold Remediation

Before

A Barton Hill home had visible mold across roughly 400 square feet of crawl space joists and subfloor sheathing. The musty odor was noticeable in the living room. Moisture readings showed wood at 22 to 28 percent content.

After

We removed contaminated insulation and debris, HEPA vacuumed all framing, applied mold encapsulant, and installed a 6-mil vapor barrier across the crawl space floor. Moisture readings dropped to 11 to 14 percent within four days. The odor was gone.

Attic Mold After Roof Leak

Before

A roof flashing failure let water into the attic for two winters. Mold spread across about 200 square feet of decking and rafters. Insulation was saturated and had to be discarded. The homeowner noticed a musty smell in an upstairs bedroom.

After

We removed affected insulation, HEPA vacuumed and treated decking and rafters with antimicrobial solution, and applied mold encapsulant. Clearance testing passed on the first round. The roofer repaired the flashing the following week.

Problems we solve

Mold Problems We Solve for SAN PEDRO Homeowners

Most mold calls we get in SAN PEDRO trace back to one of these issues. Each one needs a different approach, and each one gets worse if you wait.

Ask a pro →
01

Black mold growth behind bathroom walls

We locate the moisture source, cut an inspection opening, and remove contaminated drywall and insulation under containment. Framing is HEPA vacuumed, treated with antimicrobial solution, and encapsulated before new drywall goes up.

↗
02

Crawl space mold under older homes

We remove contaminated debris and insulation, treat joists with mold encapsulant, and install a vapor barrier to block ground moisture. Most crawl space jobs take 1 to 2 days.

↗
03

Attic mold from roof leaks or condensation

We remove affected insulation, treat decking and rafters with antimicrobial solution, and document the moisture source so your roofer or HVAC contractor can fix it. Clearance testing confirms the attic is clean.

↗
04

Musty odors with no visible mold

We run air quality and mold testing to find the source. If growth is confirmed, we remediate it. If not, we identify the moisture issue and recommend ventilation or dehumidification fixes.

↗
Proof you can check

Licensed, Certified, and Verified

✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
ACAC Certified Microbial InvestigatorAmerican Council for Accredited Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
CSLB Licensed ContractorCalifornia Contractors State License Board
Good questions

Frequently Asked Questions About Toxic Mold Removal

(833) 929-5837 →

Most residential jobs in SAN PEDRO run $1,200 to $6,500 in 2026, depending on square footage and how deep the growth has spread. A single bathroom or small attic typically lands at the low end. Crawl space mold removal across a full foundation can push higher. We provide a written flat-rate quote after inspection, and clearance testing is included.

Stachybotrys and other toxigenic species release mycotoxins that can trigger respiratory issues, headaches, and fatigue with prolonged exposure. Risk scales with spore concentration and how long you breathe it. Children, elderly residents, and anyone with asthma or immune conditions face higher risk. If you smell musty odors or see black growth, get air quality and mold testing done before assuming it is harmless.

We do. Our crew is based in the harbor area and covers SAN PEDRO, Barton Hill, South Shores, and the surrounding Palos Verdes border neighborhoods. We are IICRC-certified, CSLB-licensed, and carry insurance. Call (833) 929-5837 and we can usually schedule an inspection the same day.

Common symptoms include chronic sinus congestion, coughing, wheezing, eye irritation, skin rashes, headaches, and unexplained fatigue that improves when you leave the building. If symptoms ease when you are away from home and return when you come back, that pattern points to an indoor air quality problem. Mold spore testing confirms whether elevated counts are present.

Ready when you are

Get Toxic Mold Removal in SAN PEDRO, California Today

If you see black mold growth or smell musty odors, do not wait. Call (833) 929-5837 for a same-day inspection. We are licensed, insured, and IICRC-certified, and we back every job with post-remediation testing.

Call Now (833) 929-5837 →
Request an appointment

Contact Our San Pedro Mold Crew

Call us at (833) 929-5837 any time, day or night. We answer live 24/7 for emergencies and schedule same-day inspections for non-urgent jobs. You can also email info@moldremediationservicesanpedro.com and we will respond within a few hours during business hours.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837