Musty odor with no visible mold
We use a thermal imaging camera and borescope inspection camera to find hidden growth without demolition. Air sampling confirms whether spores are circulating in your indoor air.
When you hire a Certified Mold Inspector in SAN PEDRO, California, you get a trained eye on every wall, attic, and crawl space, not a guess. We inspect, test, and document mold growth with moisture meters, thermal imaging cameras, and lab samples so you know exactly what you're dealing with. Whether you own a Harbor Highlands bungalow or a Gaffey Street Corridor duplex, we find the source before it spreads.

A Certified Mold Inspector in SAN PEDRO, California is a trained, credentialed professional who locates mold growth, identifies the moisture source feeding it, and documents the findings in a written report you can hand to a landlord, buyer, or insurance adjuster. We don't just swab a dark spot and call it a day. We check the whole building envelope: attic sheathing, crawl space joists, bathroom subfloor, ceiling drywall, and HVAC returns. We use moisture meters, a thermal imaging camera, and a borescope inspection camera to see inside wall cavities without tearing your house apart.
SAN PEDRO homes sit close to the water, and that marine layer does a number on older stucco and wood-frame construction. Add a slow roof leak or a cracked supply line and you've got black mold growth inside 24 to 48 hours. That's why so many locals search for a licensed mold inspector SAN PEDRO homeowners can actually reach. If you've smelled a musty odor in a closet or noticed a stain spreading across the ceiling, it's time to find a certified mold inspector in SAN PEDRO CA before the problem gets into the framing.
Every inspection includes a full visual walkthrough, moisture mapping, air and surface sampling, and a written report with lab results. Here's what you get when you book with us.
We inspect every room, the attic, the crawl space, and the HVAC system. We photograph visible growth, staining, and water damage, and note any conditions that could lead to mold.
We use a moisture meter and thermal imaging camera to map elevated moisture behind walls, under floors, and above ceilings. This tells us where mold is likely growing even if you can't see it.
We collect air samples with a calibrated pump and surface samples with sterile swabs. Samples go to an accredited lab for analysis. Results typically come back in 24 to 48 hours.
You get a detailed report with photos, moisture readings, lab results, and a recommended scope of work. The report is written to California Department of Public Health guidelines and accepted by insurers and realtors.
After you receive the report, we're available by phone to answer questions and walk you through the findings. If remediation is needed, we can refer you to a licensed mold remediation company.
We ask about the symptoms: musty odors, visible staining, recent water damage, or a known leak. You tell us where you've noticed problems. We schedule a same-day or next-day visit, usually within a two-hour arrival window.
Our inspector walks the property room by room, checking attic sheathing, crawl space joists, bathroom corners, under sinks, and around HVAC equipment. We note any visible growth, staining, or warping and photograph everything.
We run a moisture meter across walls and floors, then confirm suspicious readings with a thermal imaging camera. Elevated moisture behind drywall or under flooring tells us where mold is likely growing even if you can't see it yet.
We collect air samples with a calibrated pump and surface samples with sterile swabs. Samples go to an accredited lab. We also check HVAC returns for airborne mold spores that could be circulating through the house.
You get a written report within 24 to 48 hours: lab results, photos, moisture readings, and a recommended scope of work. If remediation is needed, we walk you through the options and pricing. No pressure, no upsell.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Measures moisture content in drywall, wood, and flooring. Elevated readings tell us where mold is likely growing.
Detects temperature differences behind walls and under floors. We use it to find hidden moisture without demolition.
Lets us see inside wall cavities, ductwork, and crawl spaces without cutting holes.
Collects calibrated air samples for lab analysis. Tells us whether airborne mold spores are elevated.
Used during inspection to avoid spreading spores. We also use HEPA filters in our air scrubbers when needed.
Reduces humidity in crawl spaces and attics during inspection. Helps us get accurate moisture readings.
Respirators, gloves, and coveralls protect our inspectors and prevent cross-contamination between rooms.
A homeowner in Vista del Oro noticed a musty smell and a stain on the ceiling. A roof leak had been dripping into the attic for months. Insulation was damp and mold was growing on the sheathing.
We documented the extent of growth with photos and moisture readings. Lab results confirmed black mold. The homeowner used our report to file an insurance claim and get the roof repaired and attic remediated.
A bungalow in Harbor Highlands had a persistent musty odor. The crawl space had no vapor barrier and moisture levels were high. Joists and subfloor showed visible mold growth.
We documented the mold and moisture readings, then recommended a vapor barrier and dehumidifier. After remediation, post-testing confirmed mold levels were back to normal.
A homeowner in Point Fermin had cleaned bathroom mold three times, but it kept coming back. The bathroom had no exhaust fan and a slow leak behind the shower wall.
We used a thermal imaging camera to find the leak and documented mold behind the tile. The homeowner fixed the leak, installed an exhaust fan, and had the bathroom remediated. No mold has returned.
Mold is a symptom, not the root cause. Here are the most common problems we find in SAN PEDRO homes and how we help you solve them.
Ask a pro →We use a thermal imaging camera and borescope inspection camera to find hidden growth without demolition. Air sampling confirms whether spores are circulating in your indoor air.
We inspect behind tile, under vanities, and around tubs and showers. Moisture readings tell us whether there's a leak or just poor airflow. We document findings so you can fix the root cause.
We inspect sheathing, rafters, and insulation for mold growth and moisture. We document the extent and recommend remediation if needed. We also check HVAC returns for airborne spores.
We inspect joists, insulation, and vapor barriers. Moisture readings tell us whether the crawl space needs better drainage, a vapor barrier, or a dehumidifier.
Start by checking credentials: IICRC AMRT, ACAC Certified Microbial Investigator, and a CSLB license. Ask whether they use a moisture meter, thermal imaging camera, and accredited lab testing. We meet all of those standards and can usually schedule an inspection within 24 hours. Call (833) 929-5837 to book.
At minimum, look for IICRC AMRT (Applied Microbial Remediation Technician) and IICRC WRT (Water Restoration Technician). For complex cases, an ACAC Certified Microbial Investigator is the gold standard. We also carry EPA Lead-Safe Certification and OSHA 10, which matter in older SAN PEDRO homes where lead paint and asbestos may be present.
Most residential inspections run $300 to $800 depending on square footage, number of samples, and whether we're checking attics, crawl spaces, or HVAC systems. Commercial properties and multi-unit buildings cost more. We give you a flat quote upfront, no surprises. Lab fees are included in most packages.
Yes. We're based in SAN PEDRO and serve the entire Harbor area, including San Pedro Waterfront, Downtown San Pedro, Point Fermin, and Harbor Highlands. We can usually be on site the same day you call. If you're in a neighboring community like Rancho Palos Verdes or Wilmington, we cover that too.
If you've seen staining, smelled a musty odor, or had recent water damage, don't wait. Mold spreads fast. Call (833) 929-5837 to schedule your inspection. We offer same-day and 24/7 availability, and most reports are ready within 24 to 48 hours.
Book Inspection Now (833) 929-5837 →Call us at (833) 929-5837 any time, day or night. We answer live 24/7 for emergencies and schedule same-day inspections for non-urgent jobs. You can also email info@moldremediationservicesanpedro.com and we will respond within a few hours during business hours.