Musty odor with no visible mold
We use a thermal imaging camera and borescope inspection camera to find the source without demolition, then take air samples to confirm what is growing and how far spores have spread.
If you smell something musty in your hallway or spot dark staining on a ceiling, our Mold Inspection near me in SAN PEDRO, California service pinpoints the source instead of guessing. We run moisture meters, thermal imaging cameras and air samples through a certified lab, then hand you a written report you can act on. Homeowners, landlords and Harbor-area business owners call us when a leak, a flood or a closed-up room starts to smell wrong.

A Mold Inspection near me in SAN PEDRO, California is a non-invasive investigation that finds where moisture is feeding mold growth and how far it has spread. We start with a walkthrough of the suspect rooms, then confirm what we see with a moisture meter, a thermal imaging camera and a borescope inspection camera pushed into wall cavities. Air and surface samples go to an accredited lab, and you get a written report with spore counts and photographs within 24 to 48 hours.
San Pedro homes sit close to the water, so marine air, morning fog and winter rain keep exterior walls and crawl spaces damp for months. Add a 1920s bungalow with original plumbing or a 1970s build with a leaking supply line, and you have ideal conditions for black mold growth and musty odors. That is why so many residents search for a mold assessment near me SAN PEDRO before they buy, rent out or renovate a property.
Every inspection includes a full visual walkthrough, moisture and thermal scanning, and a written report with photographs. Lab sampling is included when you request it, and we quote the total price before we arrive so there are no add-ons at the end.
We inspect every room, plus the attic, crawl space and any area with a history of leaks or moisture. We note visible growth, staining, musty odors and conditions that could feed mold.
A moisture meter and thermal imaging camera sweep walls, ceilings and floors to find damp pockets behind finished surfaces. This is how we catch problems that are not yet visible.
A borescope inspection camera lets us look inside wall cavities through small access points, so we can confirm growth without cutting open drywall. It saves you repair costs and gives us a clearer picture.
We pull indoor and outdoor air samples plus surface swabs from any visible growth. Samples ship to an accredited lab the same day, and results come back in 24 to 48 hours with spore counts by species.
Your report includes photographs, moisture readings, lab results and a recommended scope of work. It is written so a contractor, insurance adjuster or landlord can read it and act on it without calling us for clarification.
Once results are in, we call you to explain what we found, what it means and what to do next. You can ask questions and get straight answers, with no pressure to book remediation work.
We ask about the smell, the staining, any recent leaks or flooding, and how long the problem has been going on. That five-minute conversation tells us which rooms to prioritize and whether you need same day mold inspection SAN PEDRO CA scheduling.
A technician walks the property with you, checking bathrooms, kitchens, attics, crawl spaces and any wall that backs onto a plumbing chase. We note musty odors, visible staining and areas where water damage mold is likely hiding.
We sweep walls, ceilings and floors with a moisture meter and a thermal imaging camera to find damp pockets behind finished surfaces. A borescope inspection camera lets us look inside wall cavities without cutting open drywall.
We pull air samples from inside and outside the home, plus surface swabs from any visible growth. Samples ship to an accredited lab the same day, and results come back in 24 to 48 hours with spore counts by species.
You get a written report with photographs, moisture readings, lab results and a recommended scope of work. We walk you through the findings by phone so you understand what needs fixing and what can wait.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Measures moisture content in drywall, wood and flooring to find damp areas that look dry on the surface.
Detects temperature differences behind walls and ceilings, revealing hidden moisture and insulation gaps without cutting into finishes.
Slides into wall cavities through small access points to confirm growth inside spaces we cannot see directly.
Filters airborne spores and particles during inspection and remediation work to keep clean areas protected.
Creates negative pressure in a work zone so spores cannot escape into unaffected rooms during removal.
Dries out damp areas after a leak or flood to remove the moisture mold needs to grow.
Removes settled spores from surfaces and framing without releasing them back into the air.
A homeowner noticed a musty smell in the hallway but could not find any visible mold. The smell had been building for about three months, and they were worried it was coming from the bathroom wall.
Our thermal imaging camera found a slow supply-line leak behind the bathroom wall. Air samples confirmed elevated spore counts, and the report documented the affected area so a plumber and drywall crew could fix it. The smell was gone within a week of repair.
A buyer's inspector flagged dark staining in the attic of a 1940s bungalow two weeks before closing. The seller needed documentation fast to keep the deal alive.
We inspected the attic the next day, confirmed the growth was a non-toxigenic species, and identified poor ventilation as the cause. The written report with lab results satisfied the buyer and lender, and closing went through on schedule.
A landlord received complaints about a musty smell in a ground-floor unit. The crawl space had standing moisture after winter rains, and the framing was starting to show growth.
We documented the affected framing with photos and moisture readings, then recommended a remediation scope that included drying, HEPA vacuuming and antimicrobial treatment. Post-remediation testing confirmed the crawl space was clear.
Most mold calls start with a smell, a stain or a symptom. Here are the problems we run into most often in San Pedro homes and businesses, and how we handle them.
Ask a pro →We use a thermal imaging camera and borescope inspection camera to find the source without demolition, then take air samples to confirm what is growing and how far spores have spread.
We trace the water back to its source, whether that is a slow plumbing drip, a failed shower pan or poor attic ventilation, and document it in the report so the underlying issue gets repaired.
We offer same day mold inspection SAN PEDRO CA scheduling for real estate timelines and deliver a written report with lab results within 48 hours, formatted for buyers, sellers and agents.
We sample the air in bedrooms and living areas and compare indoor spore counts to an outdoor baseline. If levels are elevated, you have documentation to justify remediation or a landlord repair request.
Most residential inspections in San Pedro run $250 to $650 in 2026, depending on square footage and how many lab samples you need. A basic visual inspection with one or two air samples sits at the lower end, while a full home with attic, crawl space and multiple rooms pushes toward the top. We quote a flat price before we arrive, so there are no surprises.
We do. Our technicians hold IICRC AMRT and WRT certifications and follow the ANSI/IICRC S520 standard, which is the benchmark for mold assessment and remediation work in California. We serve San Pedro and the surrounding Harbor area, including Point Fermin, Vista del Oro and the Gaffey Street Corridor. Call (833) 929-5837 to schedule.
A typical single-family home takes two to three hours on site. Larger properties, or homes with both an attic and a crawl space, can run three to four hours. Lab results come back in 24 to 48 hours, and we walk you through the written report by phone once everything is in.
Yes, in most cases. Call before noon and we can usually have a technician at your property the same afternoon. If you are dealing with an active leak, a recent flood or a strong musty odor, tell the dispatcher when you call so we can prioritize your address and bring the right equipment.
Call (833) 929-5837 and we will schedule your inspection, usually the same day. You get a flat quote upfront, a licensed technician on site, and a written report with lab results within 48 hours. If you smell something musty, do not wait for it to spread.
Schedule Inspection (833) 929-5837 →Call us at (833) 929-5837 any time, day or night. We answer live 24/7 for emergencies and schedule same-day inspections for non-urgent jobs. You can also email info@moldremediationservicesanpedro.com and we will respond within a few hours during business hours.