Certified inspectors, moisture mapping, and lab-backed results

Black Mold Inspection in SAN PEDRO, California

Black Mold Inspection in SAN PEDRO, California is the fastest way to find out whether that musty smell or dark ceiling stain is actually mold. We inspect attics, crawl spaces, bathrooms, and wall cavities with moisture meters and thermal imaging, then send air and surface samples to an accredited lab. If you need toxic black mold testing SAN PEDRO homeowners trust, we get you answers in 24 to 48 hours.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Professional Black Mold Inspection in SAN PEDRO
Careful work. Honest options.
About this service

What Black Mold Inspection in SAN PEDRO, California Covers

Black Mold Inspection in SAN PEDRO, California is a room-by-room investigation that locates active mold growth, traces the moisture feeding it, and documents the scope with photos, moisture readings, and lab results. We check the attic sheathing, crawl space joists, bathroom tile lines, window sills, and every wall cavity near a plumbing run. A moisture meter tells us where the water is. A thermal imaging camera shows us what the eye can't see behind drywall.

SAN PEDRO homes sit close to the harbor, which means marine layer humidity, salt air, and decades-old plumbing. That combination feeds black mold growth in crawl spaces, ceiling cavities, and bathroom walls faster than most homeowners expect. If you've searched for black mold inspection near me SAN PEDRO CA after a roof leak or a slow drain drip, we can be on site the same day. We also serve Barton Hill California and the surrounding hill neighborhoods where attic mold is common.

  • ✓ Lab-Confirmed Results
  • ✓ Moisture Source Found
  • ✓ Same-Day Appointments
  • ✓ Written Scope You Can Use
What's included

What's Included in Every Black Mold Inspection

Every inspection includes a full visual walkthrough, moisture mapping, air and surface sampling, lab analysis, and a written report with photos and a scope. Remediation is quoted separately if it's needed. Here's what you get.

✓

Full Visual Walkthrough

We inspect every room, the attic, the crawl space, the basement if you have one, and the exterior envelope. We look for staining, warping, bubbling paint, and musty odors. A borescope inspection camera lets us see inside wall cavities without cutting drywall.

✓

Moisture Mapping

A moisture meter and thermal imaging camera scan suspect surfaces for elevated readings and temperature anomalies. Every reading gets marked on a floor plan so you can see exactly where the water is. This is where we usually find the source.

✓

Air and Surface Sampling

We run an outdoor control sample plus one or more indoor air samples with a calibrated pump, then swab any visible growth. Samples ship to an accredited lab the same day. Turnaround is typically 24 to 48 hours.

✓

Written Report With Photos

You get a report with photos, moisture readings, lab results, species identification, and spore counts. It's written so a contractor, realtor, or insurance adjuster can read it without a translator. We walk you through it by phone.

✓

Scope and Remediation Quote

If growth is confirmed, the report includes a clear scope: what needs to come out, what can be cleaned in place, and what containment looks like. We quote remediation the same day. If no remediation is needed, we tell you that in writing.

How it works

What to Expect During Your Inspection

01

Phone Intake

We ask five questions: where you've seen or smelled something, when it started, whether there's been a leak or flood, how old the home is, and whether anyone in the house has been getting sick. That intake takes about 10 minutes and lets us bring the right tools. Most calls are scheduled the same day or the next morning.

02

Visual Walkthrough

On site, we walk the property with you. We check the attic, crawl space, bathrooms, kitchen, laundry area, and every exterior wall for staining, warping, and musty odors. We use a borescope inspection camera to look inside wall cavities without cutting drywall. This step takes 20 to 30 minutes on a typical 1,500 square foot home.

03

Moisture Mapping

We run a moisture meter across suspect surfaces and a thermal imaging camera across walls and ceilings to find temperature anomalies that signal hidden water. Elevated readings get marked on a floor plan. This is where we usually find the source: a slow drip behind a vanity, a failed wax ring, or a roof penetration leaking into the attic.

04

Air and Surface Sampling

We run an outdoor control sample and one or more indoor air samples with a calibrated pump, then swab any visible growth. Samples ship to an accredited lab the same day. Lab turnaround is typically 24 to 48 hours. We also note spore types, which matters when you're dealing with toxic mold exposure concerns.

05

Report and Scope

You get a written report with photos, moisture readings, lab results, and a clear scope: what's mold, what's just staining, what needs removal, and what can be cleaned in place. We walk you through it by phone. If remediation is needed, we quote it the same day. If it isn't, we say so.

Tools & methods

Tools and Methods We Use on Every Job

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Moisture Meter

Pin and pinless meters read moisture content in drywall, wood, and concrete. They tell us where water is sitting even when the surface feels dry.

Thermal Imaging Camera

Infrared imaging shows temperature anomalies behind walls and ceilings that signal hidden moisture. It's how we find leaks without cutting drywall.

Borescope Inspection Camera

A flexible camera that fits through a small hole to look inside wall cavities, ductwork, and crawl spaces. It confirms growth without demolition.

Air Sampling Pump

A calibrated pump pulls a known volume of air through a spore trap cassette. The cassette ships to an accredited lab for species identification and spore counts.

HEPA Vacuum

A ProTeam or 3M HEPA vacuum captures mold spores and debris during cleanup. Standard shop vacs just blow spores back into the air.

Air Scrubber With HEPA Filter

An Abatement Technologies or Dri-Eaz air scrubber runs continuously during remediation to filter airborne spores and keep the rest of the home clean.

Negative Air Machine

A negative air machine keeps containment under negative pressure so spores can't escape into unaffected rooms during removal.

Real results

Before and after.

Attic Mold in Barton Hill

Before

A homeowner noticed dark staining on the attic sheathing after last winter's rains. Moisture readings on the rafters were elevated across a 200 square foot section, and surface samples confirmed Cladosporium and Penicillium growth.

After

We removed affected insulation, HEPA vacuumed the framing, and treated the sheathing with antimicrobial solution and encapsulant. Post-remediation air samples came back at normal outdoor baseline levels. The whole job took two days.

Bathroom Recurrence in Point Fermin

Before

A 1948 bungalow had mold returning on the bathroom ceiling every few months despite regular cleaning. A moisture meter showed elevated readings behind the tile, and a borescope confirmed growth inside the wall cavity above the shower.

After

We removed the affected drywall and tile, treated the framing, replaced the failed shower pan liner, and rebuilt the wall. Post-remediation air samples came back clean. The job finished in three days.

Crawl Space Mold in Harbor Highlands

Before

A homeowner complained about a musty smell in the living room. Crawl space inspection found elevated moisture on the floor joists, deteriorated insulation, and visible growth on the subfloor above a failed vapor barrier.

After

We removed the old insulation, HEPA vacuumed the joists, treated with antimicrobial solution, and installed a new 6-mil vapor barrier. Post-remediation air samples came back at baseline. The job took two days.

Problems we solve

Problems Our Black Mold Inspection in SAN PEDRO Solves

Most mold calls come down to one of a handful of scenarios. Here are the ones we see most often in SAN PEDRO, and how we handle them.

Ask a pro →
01

Musty odor with no visible growth

We use a thermal imaging camera and moisture meter to find the water source, then a borescope inspection camera to confirm growth inside the cavity. Air sampling confirms species and spore count. Once we know where it is, we can scope the fix.

↗
02

Attic mold after a roof leak

We test the sheathing and rafters, confirm species with surface samples, and quote removal. Dry ice blasting mold is often the right call here because it cleans structural wood without chemicals or abrasive media. Most attic jobs finish in one to two days.

↗
03

Crawl space mold and standing moisture

We inspect the joists, insulation, and vapor barrier, then sample the air. Removal typically involves pulling affected insulation, HEPA vacuuming the framing, and treating with antimicrobial solution and encapsulant. We also identify the moisture source so it doesn't come back.

↗
04

Post-leak growth after a slow drip

We trace the moisture back to the source, confirm the extent with moisture mapping, and sample the affected area. If growth is confirmed, we scope removal and fix the plumbing issue in the same visit. Fast action keeps the job small.

↗
Proof you can check

Credentials and Reviews

✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
ACAC Certified Microbial InvestigatorAmerican Council for Accredited Certification
✓
California Contractors State License Board (CSLB) LicenseState of California
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
Good questions

Frequently Asked Questions

(833) 929-5837 →

Most residential inspections in SAN PEDRO run $250 to $600 in 2026, depending on square footage and how many samples we collect. A basic single-family home with two air samples and one surface swab typically lands around $350. Larger homes, crawl space inspections, and commercial properties run higher. We quote the price before we schedule, so there's no surprise on the invoice.

You usually notice one of four things: a musty, earthy smell that doesn't go away, dark staining on drywall or ceiling tiles, warping or bubbling paint, or allergy symptoms that get worse when you're home. Visible black or green-black growth near a water source is the clearest sign. If you're not sure, a black mold assessment SAN PEDRO inspection with air sampling will confirm it in 24 to 48 hours.

We do. Our inspectors hold IICRC AMRT certification and follow ANSI/IICRC S520 sampling protocols. We collect outdoor control samples, indoor air samples with a calibrated pump, and surface swabs of any visible growth, then ship them to an accredited lab. Results come back in 24 to 48 hours with species identification and spore counts. Call (833) 929-5837 to schedule.

Not every black-colored mold is Stachybotrys, but the ones that are can produce mycotoxins and trigger respiratory symptoms, headaches, and sinus issues, especially in kids, seniors, and anyone with asthma. The risk scales with how much growth is present and how long it's been there. Lab testing tells you the species and spore count, which is the only way to know what you're actually dealing with.

Ready when you are

Book Your Black Mold Inspection in SAN PEDRO, California Today

Same-day appointments, 24/7 emergency response, and lab results in 24 to 48 hours. If you've got a musty smell, a recent leak, or visible growth, don't wait. Call (833) 929-5837 and we'll schedule your inspection today.

Schedule Inspection (833) 929-5837 →
Request an appointment

Contact Our San Pedro Mold Crew

Call us at (833) 929-5837 any time, day or night. We answer live 24/7 for emergencies and schedule same-day inspections for non-urgent jobs. You can also email info@moldremediationservicesanpedro.com and we will respond within a few hours during business hours.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837