Lab-backed mold sampling that finds the source, not just the stain

Mold Testing near me in SAN PEDRO, California

If you have smelled that musty odor or spotted dark streaks on drywall, you need Mold Testing near me in SAN PEDRO, California that actually tells you what is growing and where it started. Our certified inspectors sample air and surfaces, run moisture mapping, and deliver lab results you can act on. We serve homeowners, landlords, and property managers across San Pedro and the Harbor area.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Dependable Mold Remediation Service across SAN PEDRO, California
Careful work. Honest options.
About this service

What Mold Testing near me in SAN PEDRO, California Covers

Mold Testing near me in SAN PEDRO, California is a diagnostic service that pulls air and surface samples from your home or building, sends them to an accredited lab, and returns a written report identifying the mold genus, spore counts, and likely moisture source. We use moisture meters, thermal imaging cameras, and borescope inspection cameras to trace hidden water intrusion behind walls, under floors, and inside HVAC chases before we ever pull a sample.

San Pedro sits on the coast, so marine layer humidity, winter roof leaks, and aging plumbing in pre-1960 bungalows create ideal conditions for black mold growth and attic mold. If you have been searching for a local mold testing company SAN PEDRO California homeowners trust, we can be on-site the same day in most cases. We also handle post-remediation verification so you know the cleanup actually worked.

  • ✓ Lab-Confirmed Identification
  • ✓ Hidden Moisture Found Fast
  • ✓ Same-Day Scheduling Available
  • ✓ Clear Written Report
What's included

What Is Included in Our Mold Testing Service

Every mold testing visit includes a full moisture survey, air and surface sampling, lab analysis, and a written report. If you need additional samples, crawl space access, or rush lab turnaround, we quote those upfront before we start.

✓

Full Moisture Survey

We check every room with a moisture meter and thermal imaging camera, focusing on bathrooms, kitchens, attics, and crawl spaces. You get a map of any elevated readings and photos of what we found.

✓

Air Sampling

We pull 2 to 4 air samples with a calibrated pump, including one outdoor baseline for comparison. Each sample is logged with a chain-of-custody form and sent to an accredited lab for genus-level identification and spore counting.

✓

Surface Sampling

Where we see visible growth or staining, we take surface samples with sterile swabs or tape lifts. This confirms whether the discoloration is actually mold and identifies the species.

✓

Written Lab Report

You receive a PDF report within 24 to 48 hours with lab results, photos, moisture readings, and a plain-language summary. The report is suitable for insurance claims, real estate transactions, and landlord-tenant disputes.

✓

Remediation Scope If Needed

If results show elevated mold, we provide a written scope of work describing what needs to be removed, what containment is required, and what clearance testing will look like. No obligation to hire us for the cleanup.

How it works

How Our Mold Testing Process Works

01

Phone Intake

We ask about the smell, visible growth, recent water events, and the age of the building. That call takes 5 to 10 minutes and lets us load the right equipment. If you are in San Pedro Waterfront or the Gaffey Street Corridor, we can often schedule within a few hours.

02

On-Site Inspection

A certified inspector walks the property with a moisture meter and thermal imaging camera, checking likely problem areas first: bathrooms, attic sheathing, crawl space joists, and under sinks. We document everything with photos and note any musty odors or visible staining.

03

Sample Collection

We pull air samples with a calibrated pump and surface samples with sterile swabs or tape lifts. Each sample is labeled, sealed, and logged with a chain-of-custody form. A typical home gets 2 to 4 air samples plus 1 to 3 surface samples.

04

Lab Analysis

Samples go to an accredited microbiology lab. Standard turnaround is 24 to 48 hours. Rush analysis is available if you are in escrow or dealing with a tenant complaint. The lab identifies genus and counts spores per cubic meter.

05

Report and Recommendations

We deliver a written report with lab data, photos, moisture readings, and a clear next step. If remediation is needed, we provide a scope of work. If air quality is normal, we tell you what to monitor and when to retest.

Tools & methods

Tools and Methods We Use for Mold Testing

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Moisture Meter

Pin-type and pinless meters measure moisture content in drywall, wood, and concrete. We use them to find water intrusion points and map the extent of any elevated readings.

Thermal Imaging Camera

Infrared cameras reveal temperature differences that indicate hidden moisture behind walls, under floors, and around windows. This lets us find problems without tearing anything open.

Borescope Inspection Camera

A flexible camera that fits through a small hole to inspect inside wall cavities, HVAC ducts, and crawl spaces. We use it to confirm what is growing in areas we cannot see directly.

Air Sampling Pump

Calibrated pumps pull a known volume of air through a spore trap cassette. This gives the lab a precise spore count per cubic meter, which we compare to an outdoor baseline.

HEPA Vacuum

When we need to clean up small areas during inspection or after remediation, HEPA vacuums capture particles down to 0.3 microns. We use ProTeam and 3M units on every job.

Air Scrubber with HEPA Filter

During remediation, air scrubbers run continuously to filter airborne spores and keep the work area under negative pressure. We use Abatement Technologies and Dri-Eaz units.

Dehumidifier and Air Mover

After water damage, we use Dri-Eaz and Phoenix Restoration dehumidifiers and air movers to dry the structure quickly and prevent mold from taking hold.

Real results

Before and after.

Attic Mold After Winter Roof Leak

Before

A homeowner in Point Fermin noticed a musty smell in the upstairs bedroom after the winter rains. The attic had visible dark staining on the roof sheathing, and moisture readings showed elevated levels in the insulation.

After

We sampled the affected area, confirmed Aspergillus and Penicillium growth, and scoped a remediation. After removing contaminated insulation and treating the framing, clearance testing showed spore counts back to normal.

Crawl Space Mold in Miraleste

Before

A hillside home in Miraleste had a persistent musty odor on the lower level. The crawl space had standing water after irrigation runoff, and floor joists showed visible mold growth with moisture readings above 20 percent.

After

We installed a vapor barrier, removed affected insulation, treated the joists with antimicrobial solution, and ran dehumidifiers for three days. Post-remediation testing confirmed normal spore levels.

Bathroom Mold Recurrence in Downtown San Pedro

Before

A tenant in a Downtown San Pedro apartment had recurring mold around the shower, despite cleaning it every week. The bathroom had no exhaust fan, and moisture readings in the adjacent wall were elevated.

After

We sampled the wall cavity, confirmed Cladosporium growth, and scoped remediation. After removing affected drywall and treating the framing, we recommended installing an exhaust fan rated for the room size.

Problems we solve

Mold Problems We Solve for San Pedro Properties

Most mold calls start with a smell, a stain, or a health concern. Testing tells you which one you are actually dealing with.

Ask a pro →
01

Musty odor with no visible mold

We use thermal imaging and moisture meters to trace the odor to its source, then sample the air to confirm what is growing. Most odor complaints are resolved with one inspection and a targeted remediation scope.

↗
02

Water stain on ceiling or wall

We inspect the stain, check moisture readings in the surrounding materials, and sample the area. If growth is confirmed, we scope the removal and can handle the remediation ourselves.

↗
03

Attic or crawl space mold after a leak

We inspect sheathing, rafters, and joists, sample affected areas, and if needed, remove contaminated materials, treat the framing, and install ventilation or vapor barrier upgrades to prevent recurrence.

↗
04

Post-remediation doubt after a cleanup

We run post-remediation mold testing using the same ANSI/IICRC S520 clearance protocol remediation contractors follow. You get a signed lab report showing spore counts are back to normal.

↗
Proof you can check

Licensed, Certified, and Accountable

✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
ACAC Certified Microbial InvestigatorAmerican Council for Accredited Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
California Contractors State License Board (CSLB)State of California
Good questions

Frequently Asked Questions About Mold Testing in San Pedro

(833) 929-5837 →

You can call us at (833) 929-5837 to schedule Mold Testing near me in SAN PEDRO, California. We are a local company serving San Pedro and the surrounding Harbor area, and we can usually be on-site the same day. Every inspection includes a moisture survey, air and surface sampling, and a written lab report within 24 to 48 hours.

Most residential mold sampling near me SAN PEDRO jobs run $299 to $650 in 2026, depending on the number of samples and the size of the property. A standard 1,500 square foot home with 2 air samples and 1 surface sample typically lands at $299 to $399. Larger homes, crawl spaces, and commercial buildings cost more because they require additional samples and longer inspection time.

We do. Call before noon and we can usually have an inspector on-site the same afternoon anywhere in San Pedro, including Downtown San Pedro, Vista del Oro, and the Palos Verdes Drive East corridor. We carry sampling pumps, moisture meters, and thermal cameras in every truck, so there is no return trip and no waiting on equipment.

We do not run an in-house lab, but we work with accredited microbiology labs that process our samples within 24 to 48 hours. That is actually better for you, because the lab is independent and the results are not influenced by the company selling remediation. You get a third-party report you can hand to an adjuster, landlord, or buyer.

Ready when you are

Schedule Mold Testing near me in SAN PEDRO, California Today

Call (833) 929-5837 and we will get an inspector to your San Pedro property, usually the same day. You get lab-backed results, a written report, and a straight answer about what comes next. Licensed, insured, and local to the Harbor area.

Book Inspection Now (833) 929-5837 →
Request an appointment

Contact Our San Pedro Mold Crew

Call us at (833) 929-5837 any time, day or night. We answer live 24/7 for emergencies and schedule same-day inspections for non-urgent jobs. You can also email info@moldremediationservicesanpedro.com and we will respond within a few hours during business hours.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837