Licensed crews, HEPA containment, same-day mold removal across the harbor

Mold Remediation Company in SAN PEDRO, California

When black mold shows up behind drywall or under a crawl space, you want a Mold Remediation Company in SAN PEDRO, California that finds the water source first and kills the growth second. We handle attic mold, bathroom recurrence, and water damage mold for homes and businesses from Point Fermin to the Port of Los Angeles. Our mold removal company SAN PEDRO techs carry moisture meters, thermal cameras, and HEPA air scrubbers on every call, so you get a real answer the same day you call.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Mold Remediation Service San Pedro serving SAN PEDRO, California
Careful work. Honest options.
About this service

What a Mold Remediation Company in SAN PEDRO, California Does

A Mold Remediation Company in SAN PEDRO, California is a licensed microbial contractor that locates hidden moisture, contains the affected area, removes mold-damaged materials, and treats the structure so spores stop coming back. We follow the ANSI/IICRC S520 Standard for Mold Remediation, which means containment plastic sheeting, negative air machines, and HEPA filtration before anyone touches a contaminated surface. Every job starts with a moisture meter and thermal imaging camera sweep, because mold without a water source is just a temporary fix.

SAN PEDRO sits on the harbor, so marine air keeps indoor humidity high and crawl spaces damp most of the year. That is why we see so much attic mold, crawl space mold, and bathroom mold recurrence in older bungalows near the Gaffey Street Corridor and Pacific Avenue District. If you are searching for a mold removal company near me SAN PEDRO, our crews respond 24/7 and can be on-site the same day. We pull the moisture source, dry the cavity, and verify with post-remediation testing before we close the wall.

  • ✓ Same-Day Emergency Response
  • ✓ Water Source Fixed First
  • ✓ Verified Post-Remediation Testing
  • ✓ Insurance-Ready Documentation
What's included

What Our Mold Remediation Company Includes

Every remediation we run in SAN PEDRO includes the core scope below. Add-ons like duct cleaning, vapor barriers, and reconstruction are quoted separately if you need them.

✓

Full Moisture and Mold Inspection

We walk the property with a moisture meter, thermal imaging camera, and borescope inspection camera. You get a written report showing where growth is, what caused it, and how far it has spread.

✓

HEPA Containment and Negative Air

Containment plastic sheeting, zipper doors, and a negative air machine with HEPA filters seal off the work zone. This keeps spores from drifting into clean rooms while we work.

✓

Removal of Contaminated Materials

Mold-damaged drywall, insulation, and porous materials come out and get bagged for disposal. We HEPA vacuum every exposed surface before applying any treatment.

✓

Antimicrobial and Encapsulant Treatment

We apply an antimicrobial solution to kill remaining spores, then seal framing and structural surfaces with a mold encapsulant. For heavy growth, we use dry ice blasting mold removal instead of wet methods.

✓

Structural Drying

Dri-Eaz dehumidifiers and air movers run until moisture readings drop below 15 percent. We monitor daily and adjust equipment placement based on real-time readings.

✓

Post-Remediation Clearance Testing

Air samples are collected and compared to an outdoor baseline. You get the lab report showing spore counts are back to normal, which is what you need for insurance and resale.

How it works

What to Expect From Start to Finish

01

Inspection and Testing

A certified technician walks the property with a moisture meter, thermal imaging camera, and borescope inspection camera. We map the affected area, identify the water source, and take air and surface samples. This visit usually takes 60 to 90 minutes and you get a written scope the same day.

02

Containment Setup

We seal off the work zone with containment plastic sheeting, zipper doors, and duct tape, then run a negative air machine with HEPA filters so spores cannot drift into clean rooms. Crews suit up in personal protective equipment and respirators before entering. Setup typically takes 1 to 2 hours.

03

Removal and Treatment

Contaminated drywall, insulation, and porous materials come out and get bagged. We HEPA vacuum every surface, then apply an antimicrobial solution and mold encapsulant. For heavy growth on framing, we use dry ice blasting mold removal, which strips spores without water or harsh chemicals.

04

Drying and Air Scrubbing

Dri-Eaz dehumidifiers and air movers run until structural moisture drops below 15 percent. Air scrubbers with HEPA filters and a fogger with Benefect or Concrobium keep the air clean during the dry-down. This stage usually takes 2 to 5 days depending on how wet the cavity was.

05

Clearance Testing

Once drying is complete, we run post remediation mold testing with air samples and compare results to an outdoor baseline. If spore counts pass, we remove containment and hand you the full report. If they do not, we re-clean at no extra charge until the numbers are right.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Moisture Meter

Pin and pinless meters measure moisture content in drywall, framing, and subfloor. We use them to map the affected zone and confirm drying is complete.

Thermal Imaging Camera

Thermal cameras reveal temperature differences caused by hidden moisture behind walls and ceilings. They help us find leaks without tearing into finished surfaces.

Borescope Inspection Camera

A borescope lets us look inside wall cavities and crawl spaces through small access holes. It confirms mold growth without large demolition.

Air Scrubber with HEPA Filter

Air scrubbers pull airborne spores through HEPA filters and return clean air to the room. We run them continuously during removal and drying.

Negative Air Machine

Negative air machines keep the containment zone under negative pressure so spores cannot escape into clean areas of the home.

Dry Ice Blasting Machine

Dry ice blasting strips mold off framing and joists without water or chemicals. It is our go-to method for heavy growth on structural lumber.

Fogger

Foggers apply Benefect or Concrobium as a fine mist that reaches inside wall cavities and ductwork where sprayers cannot.

Real results

Before and after.

Bathroom Wall Black Mold Removal

Before

A slow supply line leak behind the vanity fed black mold growth for weeks. Moisture readings hit 28 percent in the wall cavity, and visible growth covered about 12 square feet of drywall.

After

We removed the contaminated drywall, treated the framing with antimicrobial and encapsulant, and dried the cavity to 11 percent. Clearance testing passed on the first attempt, and the homeowner repainted within a week.

Crawl Space Mold Under Hillside Home

Before

A Point Fermin home had mold covering roughly 40 percent of the crawl space joists. Humidity sat at 78 percent, and the musty odor was noticeable in the living room above.

After

We removed contaminated insulation, dry ice blasted the joists, and installed a vapor barrier. Humidity dropped to 55 percent within a week, and the odor cleared completely.

Attic Mold After Winter Storm

Before

A roof leak near the ridge left insulation wet for three weeks. Attic mold spread across about 200 square feet of roof deck, and spore counts inside the home were triple the outdoor baseline.

After

We removed the wet insulation, treated the deck and rafters, and ran air scrubbers for four days. Post-remediation testing showed indoor spore counts back to outdoor levels.

Problems we solve

Mold Problems We Solve for SAN PEDRO Homes

Coastal humidity, older construction, and winter storms create the same mold problems over and over in SAN PEDRO. Here is what we see most and how we fix it.

Ask a pro →
01

Black mold growth behind bathroom walls

We locate the moisture source with a borescope inspection camera, remove contaminated drywall, treat the framing with antimicrobial and encapsulant, and verify with post remediation mold testing. Most bathroom jobs finish in 3 to 5 days.

↗
02

Crawl space mold under hillside homes

Our crawl space mold removal crews remove contaminated insulation, HEPA vacuum the joists, dry ice blast heavy growth, and install a vapor barrier. Moisture readings typically drop from 25 percent to under 12 percent within a week.

↗
03

Attic mold after winter storms

We remove wet insulation, treat the roof deck and rafters, and run air scrubbers with HEPA filters until clearance testing passes. We also flag ventilation issues so the problem does not return next rainy season.

↗
04

Recurring bathroom mold after DIY cleanup

We find the actual cause, whether it is a failed caulk line, a slow drain leak, or poor exhaust ventilation. Then we remediate properly and give you a maintenance plan so it stays gone.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
ACAC Certified Microbial InvestigatorAmerican Council for Accredited Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
California Contractors State License Board (CSLB) licenseState of California
Good questions

Frequently Asked Questions

(833) 929-5837 →

Typical 2026 pricing in SAN PEDRO runs $1,200 to $6,500 for most residential jobs, with small bathroom outbreaks at the low end and full crawl space or attic remediation at the high end. Cost depends on square footage, how much drywall and insulation has to come out, and whether we need dry ice blasting or just HEPA vacuuming and antimicrobial treatment. We give you a written flat-rate scope before any work starts.

Ask three things: are they CSLB-licensed, do they hold IICRC AMRT certification, and will they run post-remediation clearance testing. A licensed mold remediation contractor SAN PEDRO CA should also carry liability insurance and provide a written scope before starting. If a company quotes over the phone without seeing the property or refuses to test after cleanup, keep looking.

The best mold remediation company near me in SAN PEDRO CA is the one that fixes the water source, not just the visible growth. Look for same-day response, HEPA containment on every job, and a workmanship warranty. We opened in 2025 and have built our reputation on clearance testing that passes the first time, plus flat-rate pricing you can see in writing before we start.

Yes. We document every job with moisture readings, thermal images, and photo logs formatted for adjusters, and we bill most major carriers directly for covered water damage mold claims. You still pay your deductible, and we walk you through what is typically covered versus what comes out of pocket. Most SAN PEDRO claims we handle are approved within 5 to 10 business days.

Ready when you are

Call Your Mold Remediation Company in SAN PEDRO, California

If you see black mold, smell something musty, or had a leak in the last 48 hours, call now. We answer 24/7, dispatch same-day, and give you a written flat-rate scope before any work starts.

Get Free Estimate (833) 929-5837 →
Request an appointment

Contact Our San Pedro Mold Crew

Call us at (833) 929-5837 any time, day or night. We answer live 24/7 for emergencies and schedule same-day inspections for non-urgent jobs. You can also email info@moldremediationservicesanpedro.com and we will respond within a few hours during business hours.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837