Licensed, insured, IICRC-certified mold removal with same-day response

Mold Remediation near me in SAN PEDRO, California

When you search for Mold Remediation near me in SAN PEDRO, California, you want a crew that finds the moisture source, not just the black spots. We handle mold removal near me SAN PEDRO calls for harbor-area homes, hillside rentals, and Port of Los Angeles commercial buildings. Thermal imaging, HEPA containment, and post-remediation testing on every job.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Mold Remediation Service San Pedro serving SAN PEDRO, California
Careful work. Honest options.
About this service

What Mold Remediation near me in SAN PEDRO, California Covers

Mold Remediation near me in SAN PEDRO, California is a licensed, IICRC-certified service that removes active mold growth, kills airborne spores, and dries the moisture source so the colony does not return. We start with a moisture meter and thermal imaging camera to map hidden water behind drywall, under flooring, and inside wall cavities. Then we build negative-air containment, run HEPA air scrubbers, and physically remove contaminated materials before treating the framing with an antimicrobial solution.

SAN PEDRO homes sit between marine fog off the harbor and hillside drainage from Point Fermin, so bathroom mold recurrence and crawl space mold are common year-round. If you have been searching for mold cleanup near me SAN PEDRO after a slab leak, roof leak, or storm intrusion, we can be on site the same day. Our crews also handle attic mold, ceiling mold, and water damage mold tied to the older 1920s-1950s housing stock along the Gaffey Street Corridor and Pacific Avenue District.

  • ✓ Same-Day Emergency Response
  • ✓ Insurance-Ready Documentation
  • ✓ Verified Clearance Testing
  • ✓ Affordable, Upfront Pricing
What's included

What Mold Remediation near me in SAN PEDRO, California Includes

Every remediation we run includes the diagnostic work, the containment, the physical removal, the treatment, the drying, and the clearance test. Rebuild work like new drywall, paint, and trim is quoted separately if you want us to handle it, but you are free to use your own contractor for that piece.

✓

Full Moisture Inspection

Moisture meter, thermal imaging camera, and borescope inspection camera readings across the affected area and any adjacent rooms. We identify the water source, not just the visible growth.

✓

Negative Air Containment

6-mil containment plastic sheeting, zipper doors, and duct tape sealing, plus a negative air machine and HEPA air scrubber running for the duration of the job.

✓

Physical Mold Removal

Removal of contaminated drywall, insulation, and porous materials in sealed bags. Structural surfaces get HEPA vacuuming followed by an antimicrobial solution and a mold encapsulant.

✓

Structural Drying

Dri-Eaz and Phoenix Restoration dehumidifiers plus air movers run until structural moisture reads at or below 15%. We check readings daily and adjust equipment placement.

✓

Post Remediation Testing

An independent ACAC Certified Microbial Investigator collects clearance samples and signs the report. If spore counts do not clear, we re-clean at no charge.

✓

Insurance Documentation

Pre- and post-remediation photos, moisture logs, thermal images, and lab reports formatted for your adjuster. We bill carriers directly when the claim covers the work.

How it works

Our 5-Step Mold Remediation Process

01

Inspection & Testing

A certified mold inspector walks the property with a moisture meter, borescope inspection camera, and thermal imaging camera. We take air and surface samples, log relative humidity, and identify the water source. Most inspections take 45-75 minutes and you get lab results in 24-48 hours.

02

Containment Build

We seal the work zone with 6-mil containment plastic sheeting, zipper doors, and duct tape, then install a negative air machine and HEPA air scrubber. This keeps airborne mold spores from migrating into clean rooms. Setup usually takes 1-2 hours depending on the size of the affected area.

03

Removal & Treatment

Contaminated drywall, insulation, and porous materials come out in sealed bags. Structural framing gets HEPA vacuuming, then an antimicrobial solution such as Benefect or Concrobium, followed by a mold encapsulant. For heavy growth on joists we bring in a dry ice blasting machine instead of abrasive grinding.

04

Drying & Dehumidification

Dri-Eaz and Phoenix Restoration dehumidifiers plus air movers run until structural moisture reads at or below 15% on a calibrated meter. That typically takes 2-4 days. We check readings daily and adjust equipment placement so we are not drying air that has already cycled.

05

Clearance Testing

An independent ACAC Certified Microbial Investigator collects post remediation mold testing samples. If spore counts match the outdoor control, we hand over the clearance report and a written scope of any rebuild work. If they do not, we re-clean before we invoice.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Maps temperature differences behind walls and under floors to locate hidden moisture without opening anything up.

Moisture Meter

Confirms actual moisture content in drywall, framing, and subfloor. We log readings daily during drying to know when to pull equipment.

Borescope Inspection Camera

Slides into a small drilled hole to inspect inside wall cavities and behind baseboards where mold often hides.

HEPA Air Scrubber and Negative Air Machine

Filters airborne spores down to 0.3 microns and keeps the containment under negative pressure so spores cannot migrate into clean rooms.

Dri-Eaz and Phoenix Restoration Dehumidifiers

Pull moisture out of the air and structural materials until readings drop to 15% or below. Paired with air movers for faster drying.

Dry Ice Blasting Machine

Removes heavy mold growth from framing and joists without abrasive grinding or water. No secondary media to clean up afterward.

Fiberlock and Concrobium Products

Antimicrobial solutions and mold encapsulants applied after physical removal to seal treated surfaces and prevent regrowth.

Real results

Before and after.

Bathroom Vanity Wall, San Pedro Waterfront

Before

A slow supply line leak behind the vanity fed black mold growth across 40 square feet of drywall and framing. The homeowner noticed a musty odor and dark staining at the baseboard about six weeks after the leak started.

After

We removed the affected drywall and insulation, HEPA vacuumed and treated the framing with an antimicrobial solution, and sealed it with a mold encapsulant. Clearance testing came back at outdoor baseline. Total job time was 3 days.

Crawl Space Under 1948 Bungalow, Barton Hill

Before

Ground moisture had been wicking into the joists and subfloor for years. Roughly 60% of the crawl space had visible mold growth, and the musty odor was traveling up into the living room through the floorboards.

After

We removed the growth, HEPA vacuumed the joists, applied a mold encapsulant, and installed a 6-mil vapor barrier across the soil. Moisture readings dropped from 22% to 11% on the joists. Job took 2.5 days.

Attic Sheathing After Roof Leak, Vista del Oro

Before

A roof leak above the master bedroom saturated the sheathing and insulation for about three weeks before the ceiling stain appeared. Visible mold covered roughly 80 square feet of sheathing and the top of the insulation batt.

After

We removed the affected insulation, dry ice blasted the sheathing to remove the growth without abrasive grinding, and treated the framing. The roofer patched the leak, and clearance testing passed on the first try. Total time was 4 days.

Problems we solve

Mold Problems We Solve for SAN PEDRO Properties

Coastal fog, hillside drainage, and 1940s plumbing create specific mold problems in SAN PEDRO. Here are the ones we see most often and how we handle them.

Ask a pro →
01

Black mold growth behind bathroom walls

We locate the moisture source with a thermal imaging camera, build containment, remove the affected drywall, and treat the framing with an antimicrobial solution. Then we correct the ventilation or caulking failure that caused the recurrence in the first place.

↗
02

Crawl space mold under pier-and-beam homes

We remove the growth, HEPA vacuum the joists, apply a mold encapsulant, and install a vapor barrier across the soil. That cuts ground moisture and stops the cycle. Most crawl space jobs take 2-3 days.

↗
03

Attic mold from roof leaks or bath fan venting

We test the sheathing, remove the affected sections, treat the framing, and correct the venting so humid air stops dumping into the attic. Clearance testing confirms the fix.

↗
04

Water damage mold after slab leaks or storms

We dry and remediate together. Extraction, structural drying with dehumidifiers and air movers, then containment and removal if growth has already started. Same-day response for active leaks.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
OSHA 10Occupational Safety and Health Administration
✓
ACAC Certified Microbial InvestigatorAmerican Council for Accredited Certification
Good questions

Frequently Asked Questions

(833) 929-5837 →

Most SAN PEDRO residential jobs run $1,200 to $4,800 in 2026, with small bathroom or attic jobs closer to $900 and full crawl space or multi-room remediations above $7,000. Price depends on square footage, how much drywall and insulation comes out, and whether drying equipment is needed. We give you a flat written number before we start, and we bill insurance directly when the claim covers it.

The best mold removal near me in SAN PEDRO is the crew that tests before and after, contains the work zone, and puts the price in writing. Look for IICRC AMRT certification, a CSLB license, and an ACAC Certified Microbial Investigator for clearance. We hold all three. Ask any company you call for their clearance protocol; if they cannot explain post-remediation testing, keep dialing.

Yes. We answer 24/7 mold remediation near me SAN PEDRO CA calls and dispatch a certified technician within 60-90 minutes for active water intrusion. That includes nights, weekends, and holidays. If a supply line just burst or a storm pushed water under a door, call (833) 929-5837 and we will start containment the same visit to stop black mold growth from taking hold.

For most SAN PEDRO addresses we arrive in 60-90 minutes for emergencies and same-day for scheduled inspections. Downtown San Pedro, San Pedro Waterfront, and the Gaffey Street Corridor are usually the fastest. Hillside addresses off Palos Verdes Drive East and White Point can add 15-20 minutes. We text you the technician's ETA when the truck rolls.

Ready when you are

Need Mold Remediation near me in SAN PEDRO, California Today?

We answer 24/7 and dispatch a certified technician within 60-90 minutes for active water intrusion. Flat-rate written scope, IICRC-certified crews, and clearance testing on every job. Call now and we will start containment the same visit.

Get Free Estimate (833) 929-5837 →
Request an appointment

Contact Our San Pedro Mold Crew

Call us at (833) 929-5837 any time, day or night. We answer live 24/7 for emergencies and schedule same-day inspections for non-urgent jobs. You can also email info@moldremediationservicesanpedro.com and we will respond within a few hours during business hours.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837